17PC Universal Clutch Alignment Tool Kit Mechanics Car Clutch Aligning Align

Categories: Automotive ;
                      AutomotiveBrake, Tire, Chassis work
SKU: 138068
Item#: Alignment-17pcs
Availability: In Stock


Chemically blackened steel components in presentation box. Aids alignment of clutch plate assembly.
Audi, Citroen, Fiat, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover,
Saab, Toyota, Vauxhall, VW and Volvo.


Alignment Adaptor Bar 
Centring Sleeves, Numbers 1 - 8 
Guide Sleeves, Numbers 1 - 8

1 x 150mm Long Alignment Tool Shaft 
8 x Pilot Bearing Adaptors: 
15.5 x 14.2 x 26.6mm 
16.7 x 15.4 x 27.0mm 
19.0 x 17.5 x 27.5mm 
20.0 x 18.6 x 27.5mm 
21.4 x 20.0 x 27.4mm 
23.0 x 21.6 x 27.5mm 
23.5 x 22.0 x 27.5mm 
26.6 x 24.2 x 27.5mm 
8 x Clutch Plate Adaptors: 
12.6 x 10.8 x 19.2mm 
14.8 x 12.2 x 19.4mm 
15.0 x 13.0 x 19.3mm 
16.0 x 14.7 x 19.7mm 
17.7 x 15.8 x 19.4mm 
19.0 x 17.1 x 19.3mm 
20.0 x 18.3 x 19.1mm 
21.6 x 20.0 x 19.1mm


  • 1. Select the appropriate guide sleeve for the internal diameter of clutch plate and slide it onto
    the alignment adaptor bar. Ensure the taper of the guide sleeve runs towards the threaded
    end of the adaptor bar.
  • 2. Select the appropriate centring sleeve for the spigot bearing and screw it onto the end of the
    alignment adaptor bar.
  • 3. Slide the clutch plate onto the guide sleeve, ensuring the correct orientation.
  • 4 Fit the centring sleeve into the spigot bearing and slide the clutch plate, on the guide sleeve,
    up to the flywheel.
  • 5. Fit the clutch pressure plate and cover assembly and bolt in place.
  • 6. Remove the alignment tool.