Stainless Submersible Deep Bore Well Water Pump 1.5HP110V 18GPM w/100FT Wire

Categories: Water Pumps
Item#: deep-bore-18GPM
Availability: In Stock

Max depth: 295ft (90M)

Diameter: 4 "

Aprox length: 34"

Operating conditions: 
-Liquid temperature up to 104F
              -Submersion depth 40m (131 ft)
              -Minimum internal diameter of well: 102mm. 
-Continuous duty. 

Motor: 
-Tow-pole induction motor (n=3850 r.p.m) 
-Built-in over load motor protector 
-Insulation Class B/F 
-Protection IP68 

Material: 
-External pump body: Stainless Steel 
-Suction strainer: Stainless Steel 
-Impeller and diffusors: Noryl 
-Bearing brackets: Brass 
-Shaft: Stainless Steel 
-Motor housing: Stainless Steel 
-Mechanical seal: Ceramic/Graphite 

Application: 
-Multistage submersible water pumps with radial closed impeller conceived in order to solve any problem of clean water conveyance. 
-Suitable for irrigation, and pressure systems and pressure systems and generally for civil and industrial purposes.

For water supply from wells or reservoirs, domestic use, civil and industrial applications and for garden use and irrigation.

  • Applications 
    For water supply from wells or reservoirs, domestic use, civil and industrial applications and for garden use and irrigation.
  • Industrial standard, stainless steel housing
  • Brass outlet (discharge): 1.5"
  • 1.5 hp 3450 RPM
  • 110v 60hz
  • Comes with control box featuring: manual On/Off switch, motor overload/thermal protection, 20uf/450v capacitor in the box.
  • 100 ft wire included
  • Flow rate :
  • 80M(262FT) @ 30L/M (10GPM)
  • 65M (213FT) @ 50L/m (13GPM)
  • 45M (147FT) @ 70L/m (18GPM)